Each order will come with it’s set of mounting glue dots. We recommend using these for your wall scripts as it’s an easy way to get your sign up with nothing permanent going into your wall. You can however, mount it with tiny nails or a more permanent solution.

• BE SURE TO LEVEL AND MEASURE OUT YOUR WALL FIRST. ONCE THE SIGN IS APPLIED TO THE WALL, IT SHOULD NOT BE RE-POSITIONED

• CAREFULLY REMOVE THE TAPE THAT WAS USED TO HOLD THE SIGN IN PLACE DURING SHIPPING

• WHEN READY TO INSTALL, SLOWLY PEEL THE PRINTED BACKINGS OFF OF THE GLUE DOTS AND APPLY TO THE WOODEN SIGN

• POSITION THE GLUE DOTS EVENLY THROUGHOUT THE NAME. ENSURE YOU HAVE SOME ON THE HIGH POINTS, LOW POINTS, AND SIDES OF THE SCRIPT

• ONCE APPLIED, PEEL THE CLEAR LAYER OFF. YOU MAY HAVE TO ‘HELP’ THE GLUE DOTS STAY IN PLACE BY HOLDING AN EDGE DOWN SO THEY DO NOT LIFT WITH THE CLEAR LAYER

• APPLY ONTO THE WALL, ADDING PRESSURE IN THE AREAS WHERE THE GLUE DOTS ARE. HOLD FOR 10-15 SECONDS WHILE IT TAKES HOLD